ADVANCED DIGITAL MOBILE / STATIC RADIO
Realix Rx775
Realix Rx775
EMPOWER YOUR OPERATION
The Realix Rx775 is a flexible digital mobile radio designed for smooth communication across vehicles, motorcycles, and control rooms. It offers multiple control head options, smart connectivity, a modern UI, and AI noise cancellation for clear audio in noisy environments.
Features
Flexible Installation
Realix Rx775 supports various setups with control head options—standard, single, or dual remote - using cables up to 40m (customizable up to 120m). Ideal for small vehicles, ambulances, trucks, buses, and desktop offices.
AI-Based Noise Cancellation
Realix Rx775 utilizes advanced AI technology to deliver clear audio by eliminating road noise, echoes, and nearby exhalations or howling sounds.
Security
Equipped with an emergency alarm, lone worker mode, authentication, encryption (basic, full, hardware), and over-the-air security.
Operating Modes
Supports digital, analog, conventional, and trunking communication.
Voice & Text
Voice: Offers private, group, and all-call options.
Text: Enables private messages, group messages, and quick texts.
Supplementary Features
Includes alert call, remote monitor, enable/disable, and radio check.
Technical Data
- GENERAL
- TRANSMITTER
- RECEIVER
- DOWNLOADS
| Frequency Range | UHF: 350-470MHz, VHF:136-174MHz |
| Channel Capacity | 1024 |
| Zone Capacity | 64 (each with a maximum of 256 channels) |
| Channel Spacing | 12.5kHz/20kHz/25kHz |
| Operating Voltage | 13.6 V ±15% |
| Standby Current Drain | < 0.5A |
| Receive Current Drain | < 2.0A |
| Transmit Current Drain (1W/5W/25W/45W/50W) | <3A/<4A/<8A/<12A |
| Frequency Stability | ±0.5 ppm |
| Antenna Impedance | 50Ω |
| Dimensions | 61.5 x 177 x 179 mm |
| Weight | 1520g |
| LCD Display | 2.4 inch |
| RF Output Power | Low power: UHF:1-25W, VHF:1:5-25W; High power: UHF:1-45W, VHF:1:5-50W |
| FM Modulation | 11K0F3E@12.5kHz; 14K0F3E@20kHz; 16K0F3E@25kHz |
| 4FSK Modulation | 12.5kHz Data Only: 7K60FXD; 12.5kHz Data and Voice: 7K60FXW |
| Conducted/Radiated Emission | -36dBm<1GHz; -30dBm>1GHz |
| Modulation Limiting | ±2.5kHz @ 12.5kHz; ±4.0kHz @ 20kHz; ±5.0kHz @ 25kHz |
| FM Hum & Noise | 40dB @ 12.5kHz; 43dB @ 20kHz; 45dB @ 25kHz |
| Adjacent Channel Power | 60dB @ 12.5kHz; 70dB @ 20/25kHz |
| Audio Response | +1 ~ -3dB |
| Audio Distortion | <=3% |
| Digital Vocoder Type | AMBE+2 |
| Digital Protocol | ETSI-TS102 361-1,-2,-3 |
| Sensitivity | Analog: 0.18µV(12dB SINAD), 0.16µV(Typical) (12dB SINAD) Digital: 0.18µV/BER5% |
| Selectivity | TIA-603: 60dB@12.5kHz/70dB@20/25kHz ETSI: 60dB@12.5kHz/70dB@20/25kHz |
| Intermodulation | TIA-603: 70dB@12.5/20/25kHz ETSI: 70dB@12.5/20/25kHz |
| Spurious Response Rejection | TIA-603: 70dB@12.5/20/25kHz ETSI: 70dB@12.5/20/25kHz |
| Blocking | TIA-603: 80dB ETSI: 84dB |
| Hum and Noise | 40dB@12.5kHz, 43dB@20kHz, 45dB@25kHz |
| Rated Audio Power Output | Internal: 3W (20 Ohm load); External: 7.5W (8 Ohm load) |
| Max Audio Power Output | Internal: 8W (20 Ohm load); External: 20W (8 Ohm load) |
| Rated Audio Distortion | <=3% |
| Audio Response (Receiver) | +1~-3dB |
| Conducted Spurious Emission | <-57dBm |
